BWHKG - 90549 ROTANIUM WIRE PULL LUBE II
- MSDS: BWHKG
- Manufacturer: PREMIER INDUSTRIAL CORP
- Product Name: 90549 ROTANIUM WIRE PULL LUBE II
- National Stock Number: 9150-00F008142
Product Identification
Product ID:90549 ROTANIUM WIRE PULL LUBE II
MSDS Date:02/21/1992
FSC:9150
NIIN:00F008142
MSDS Number: BWHKG
Responsible Party
CLEVELAND, OH 44103-3736
US
Emergency Phone: 216-391-8300
Info Phone: 216-391-8300
Cage: 18399
Contractor
Telephone: 216-391-8300
Cage: 18399
Ingredients
ISOPROPANOL (ISOPROPYL ALCOHOL), 2-PROPANOL, DIMETHYL
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: 5-10%
OSHA PEL 400 PPM
ACGIH TLV: 400 PPM
1,2-PROPANEDIOL (PROPYLENE GLYCOL)
CAS: 57-55-6
RTECS: TY2000000
Fraction By Weight: 1-5%
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 60-90%
HYDROXYETHYL CELLULOSE, 2-HYDROXYETHYL ETHER CELLULOSE,
CAS: 9004-62-0
RTECS: FJ5958000
Fraction By Weight: 1-5%
0.86 LBS/GAL; GRAMS/LITER= 0.10
RTECS: 9999999VO
Hazards
LD50 LC50 Mixture:ORAL LD50(MICE): 3600 MG/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION. SKIN: IRRITATION.
INHALATION: HARMFUL TO RESPIRATORY SYSTEM. INGESTION: HARMFUL IF
SWALLOWED.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, DIZZINESS, GIDDINESS, NAUSEA
First Aid
First Aid:EYES: IMMEDIATELY FLUSH W/PLENTY OF WATER FOR 15 MINS. SKIN:
WASH THOROUGHLY W/PLENTY OF WATER & SOAP. INHALATION: REMOVE TO
FRESH AIR. ADMINISTER OXYGEN. INGESTION: INDUCE VOMITING. OBTAIN
MEDICAL AT TENTION IN ALL CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:120F
Lower Limits:2
Upper Limits:12.7
Extinguishing Media:WATER, FOG, FOAM, DRY CHEMICAL, CO2
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS
EQUIPMENT.
Unusual Fire/Explosion Hazard:IN CONFINED SPACES, HAZARDOUS VAPORS MAY
SPREAD, BURN/BUILD UP IN LOW AREAS. AUTO IGNITION TEMP: 750F.
Accidental Release
Spill Release Procedures:REMOVE ALL IGNITION SOURCES. VENTILATE AREA.
CLEAN UP W/ABSORBENT MATERIAL. CONTAIN & PICK UP WASTE MATERIALS.
PUT IN A SEALED APPROVED CONTAINER.
Handling
Handling and Storage Precautions:KEEP FROM FREEZING. USE ONLY IN WELL
VENTILATED AREAS. KEEP AWAY FROM HEAT & FLAME. AVOID PROLONGED
BREATHING OF VAPOR/SPRAY MIST.
Other Precautions:AVOID PROLONGED/REPEATED CONTACT W/SKIN. DON'T TAKE
INTERNALLY. KEEP OUT OF REACH OF CHILDREN. ALWAYS READ & FOLLOW
DIRECTIONS ON LABEL. FOR PROFESSIONAL & INDUSTRIAL USE ONLY.
Exposure Controls
Respiratory Protection:IF INADEQUATE VENTILATION, USE APPROVED
RESPIRATORY EQUIPMENT.
Ventilation:LOCAL/MECHANICAL REQUIRED.
Protective Gloves:SOLVENT RESISTANT.
Eye Protection:SAFETY GLASSES.
Work Hygienic Practices:WASH THOROUGHLY AFTER USING.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:176F
Melt/Freeze Pt:M.P/F.P Text:10F
Vapor Pres:33
Vapor Density:0.6
Spec Gravity:0.9915
pH:8
Evaporation Rate & Reference:(WATER=1): 1
Solubility in Water:98%
Appearance and Odor:LIGHT GREEN VISCOUS LIQUID
Percent Volatiles by Volume:98
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:HEAT, SPARKS, FLAMES/SOURCES OF IGNITION,
FREEZING.
Hazardous Decomposition Products:NONE
Disposal
Waste Disposal Methods:DISPOSE OF WASTES IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.